Powersolve SR10-12 Series Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sensoren Powersolve SR10-12 Series herunter. Powersolve SR10-12 Series User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Powersolve Electronics Ltd.  8A Arnhem Road,  Newbury, RG14 5RU.  England
Tel: 01635 521858  Fax: 01635 523771  Email: sales@powersolve.co.uk
www.powersolve.co.uk
DC-DC Switching Regulator
SR10-12 Series
10A SIP & SMT Packages
Non-Isolated
Features
Non-Isolated POL Converter
SIP / SMT Packages
Output Current 10A
Input Voltage Range 9 - 14VDC
Efficiency to 95%
Over Temperature Protection
Continuous Short Circuit Protection
Remote On/Off Control
INPUT
Input Voltage Range 9.0 - 14V (12V nominal)
8.3 - 14V (Models with suffix “W”)
Under Voltage Lock-out 8.0V typ. (Power Up)
7.7V typ. (Power Down)
Input Filter Capacitive
Remote On/Off Control Open Circuit or equal to Vin (Module On)
<0.4VDC (Module Off)
OUTPUT
Voltage Accuracy ±1.5% max.
Transient Response: 25% step load change <200µ sec.
Ripple and Noise (20MHz BW) [3] 20mV rms, 50mV pk-pk max.
Temperature Coefficient ±0.03% / °C
Short Circuit Protection Continuous
Line Regulation [1] ±0.2%
Load Regulation [2] ±0.5%
Capacitive Load, Low ESR 8000µF max.
External Trim Adj. Range ±10%
+5% / -10% (SR10-12-05TH / SM)
0.75 - 5.0V (SR10-12-05WTH / WSM)
GENERAL
Efficiency See Table
Isolation Voltage Non-Isolated
Switching Frequency 300KHz typ.
Over Temperature Protection 120°C typ.
Operating Temperature Range -40°C to +85°C
Power Derating See derating curves
Storage Temperature Range -55°C to +125°C
Dimensions 50.8 x 13.0 x 8.30 mm (2.00 x 0.512 x 0.327 Inches) (SIP Package)
33.0 x 13.46 x 9.3 mm (1.30 x 0.53 x 0.366 Inches) (SMT Package)
Case Non-potted open frame type
Weight 10g
Electrical Specification
Typical at nominal line, full load & 25°C unless otherwise stated.
NOTE:
1. Measured from High Line to Low Line.
2. Measured from Full Load to No Load.
3. Output noise & ripple is measured with a 10µF tantalum & 1µF ceramic capacitor across the output.
4. It is recommended to put a 100µF capacitor with ESR<100mΩ across the input to reduce the input ripple voltage.
5. Suffix ‘N’ to model number for Negative Logic Remote On/Off Control.
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - DC-DC Switching Regulator

Powersolve Electronics Ltd.  8A Arnhem Road,  Newbury, RG14 5RU.  EnglandTel: 01635 521858  Fax: 01635 523771  Email: [email protected]

Seite 2

Powersolve Electronics Ltd.  8A Arnhem Road,  Newbury, RG14 5RU.  EnglandTel: 01635 521858  Fax: 01635 523771  Email: [email protected]

Kommentare zu diesen Handbüchern

Keine Kommentare